WEINIG

HS 120 / HS 200

Jointing technology

The horizontal single timber shapers from WEINIG are the fastest in the world. Continuous throughfeed of up to 200 parts per minute and 12 press cycles per minute make this system a production giant.

High-performance components such as fully-automatic feeding and front end control can also be integrated.

Wood that does not meet specific quality criteria can be excluded from further processing without being glued. Tool systems with varying diameters of 228.6 to 266.7 mm or 9 to 10 ½ inches can be run.

WEINIG finger jointing line for short timber pieces offers you

  • Finger joint profiles for all areas of use
  • Maximum precision and stability of finger joints
  • Robust and powerful
  • High operational capacity, up to 200 pieces/min (28 km/8h-shiftr)
  • Convenient and user-friendly
  • Processing with one and two component glue
  • Compact and efficient production process
  • Statistics and production data recording
  • Customized level of automation - from manual to fully automatic
  • Expandable using peripheries, such as feeding systems and stacking systems

WEINIG HS 120/HS 200 offers you

  • From a manual to a fully automatic system
  • Heavy cast iron construction of the shaper body
  • Shortest wood entry length 110 mm
  • (Wood) quality monitoring, defective parts are automatically identified and removed
  • Glue monitoring using a scanner (optional)
  • Up to 200 parts/min (3.3 parts/s)
  • Shaper spindles can be adjusted axially and radially
  • Tool adjustment in the 1/100 mm range
  • Motor pressure from above in the shaper range
  • Inclusive teleservice (remote maintenance) for improved customer support
  HS 120 HS 200 HS 200 Spinfeed
Wood entry length 110 - 900 mm 110 - 900 mm 110 - 900 mm
Wood width 37 - 152 (203) mm 37 - 152 (203) mm 37 - 152 (203) mm
Wood thickness 16 - 55 mm 16 - 55 mm 16 - 55 mm
Wood exit length 3,000 - 6,100 mm 3,000 - 6,100 mm 3,000 - 6,100 mm
Press force 120 (145) kN 120 (145) kN 120 (145) kN
Max. Timber cross section with a finger joint length of 10/11 mm (softwood) 100 (120) cm² 100 (120) cm² 100 (120) cm²
Max. Timber cross section with a finger joint length of 10/11 mm (hardwood) 80 (96) cm² 80 (96) cm² 80 (96) cm²
Performance (vertical finger joint) with 30 mm x 90 mm x 400 mm - - -
Performance (horizontal finger joint) with 22 mm x 50 mm x 350 mm 42 m/min 70 m/min 70 m/min
Type of feeding system Feeding line/brush feeding Brush feeding Brush feeding
Type of shaper Horizontal shaper combination Horizontal shaper combination Horizontal shaper combination
Type of separation Automatic Automatic Automatic
Type of press Two-channel press Two-channel press Two-channel press
Statistics function Standard Standard Standard
Diagnostic system Standard Standard Standard
Multiple lengths Standard Standard Standard
Number of intermediate steps Infinity Infinity Infinity
Avoiding splintering in wood (scoring unit) Standard Standard Standard
Min. wood thickness 16 mm Standard Standard Standard
Max. wood thickness 72 mm Option Option Option
Max. wood thickness 100 mm - - -
Min. wood width 30 mm Option Option Option
Vibration stop - - -
Wood adjustment monitoring Option Option Option
Quality monitoring Option Option Option
Splinter protection - - -
FlankenJet glue comb Standard Standard Standard
Communications (Teleservice) Option Option Option
Performance reserves cutting spindle - - -
Frequency-controlled feed type - - -
Servo-controlled feed type Standard Standard Standard
Drive performance - cutting spindle 15 kW 15 kW 15 kW
Drive performance - hogger (+ scoring unit) 11.5 kW 11.5 kW 11.5 kW
Catalog EN